Print
Pagoda tent with white roof and wooden poles with side walls - 3 x 3 metres
Frame
The frame of this Bonbo pagoda tent consists of wooden poles with a diameter of 63.5 mm. The wooden poles are made of tough ash wood. At Above & Beyond we offer the keder version: slots have been cut into the wooden poles, into which the supplied side walls slide. No more ugly, annoying loops! The side walls slide into the tubes and provide a sturdy and stylish pagoda. Moreover, the tent is completely windproof.
The horizontal posts are made of 1 piece of +/- 3 m long. With extremely high relative humidity, it is possible that the ash wood will expand and pinch in the aluminium profiles. This has been taken into account during production and a tolerance of approximately 2% has been provided. In extreme circumstances, this can still go wrong; putting the pole inside overnight should be enough to release the connections. The central pole is also made of wood and has a flag holder at the top and a metal protection strip at the bottom.
The wooden poles have not yet been treated. We recommend treating the wooden poles with a matt and colourless wood saturator to prevent colour fading and cracking. However, if the poles are stored dry and in a well-ventilated area after use, the wood will not be affected immediately. Avoid at all times, but especially with untreated wood, that the wood is stored moist in a poorly ventilated area.
Roof & side walls
The sidewalls and the roof are made of coated 820 g/m² PVC/PES fabric. This ultra-strong material is not transparent. The sails of the pagoda are fungus resistant and with the M2 fire safety certificate this material meets very strict European standards. The tent can therefore easily be left outside permanently.
All included side walls have a zipper in the middle, two of the four side walls have windows.
Set up
It takes between 45 and 60 minutes to set up this pagoda tent with two to three people. Pegs, muskets, tension pulleys and cables for anchoring are also included.
